Sans Repassage | AEG 72330 specification

Instructions for use

	Problem	Possible Cause	Remedy
			Pay attention to the maxi-
			mum filling quantity (see
	Washing heavily	Too mush washing probably	”Program Tables”). For easy-
	creased.	put in.	care textiles, select the pro-
			gram EASY IRON (STRIJKVRIJ,
			SANS REPASSAGE).
		Drainage hose bent.	Remove the bend.
			Consult Customer Service.
	Washing not well spun.	Maximum pump head (outlet	They can supply a retrofit kit
	Washing not well spun.	head 1m from unit's floor	as a special accessory for
	Residual water still vis-	surface) exceeded.	delivery heads of more than
	ible in the drum.		1m.
	The indicator RINSE		Switch off the unit and pull
	(SPOELEN, RINCAGE)		Switch off the unit and pull
	flashes.	Solution pump blocked.	out the mains plug. Clean
			the solution pump.
		If a siphon is connected:	Clean the siphon.
		Siphon blocked.	Clean the siphon.
		Siphon blocked.
			Wait until the indicator
			DOOR (DEUR, PORTE) lights
			up green.
			Should it nevertheless be
		The main door is locked	necessary to open the main
		The main door is locked	door:
	The main door cannot	because of a high water level	door:
	The main door cannot	because of a high water level	Turn the programme knob to
	be opened while the	or a high temperature. The	Turn the programme knob to
	be opened while the	or a high temperature. The	OFF (UIT, ARRET); turn the
	appliance is turned on.	display DOOR (DEUR, PORTE)	OFF (UIT, ARRET); turn the
	appliance is turned on.	display DOOR (DEUR, PORTE)	programme knob to PUMP
		is not lit.	programme knob to PUMP
		is not lit.	OUT (POMPEN, VIDANGE).
			OUT (POMPEN, VIDANGE).
			Press button START/PAUSE
			(START/PAUZE, MARCHE/
			ARRET). The main door can
			be opened after the water
			has been pumped out.
	Washing detergent res-	Water valve not fully opened.	Open the water valve fully.
	Washing detergent res-	Filter in the screw connec-	Close the water valve.
	idues form in the	Filter in the screw connec-	Close the water valve.
	washing detergent	tion of the intake hose on	Unscrew the intake hose
	drawer.	the water valve or on the	from the water tap and from
		unit is blocked.	the unit. Clean the filter.

32

Image 32

AEG 72330 manual Sans Repassage

Contents

ÖKO-LAVAMAT 72330 update Dear customer Tel /3630444 Contents Remedying Faults What to do if Contents Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General Safety Disposal Environment TipsDispose the packing material Dispose the old appliance Drawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Program Selector EASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P Handwash Additional Program Buttons PRE Wash VOORWAS, Prelav Consumption Values and Time Requirements What Does Update Mean? Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener Run a Washing Cycle Brief InstructionsSet the Washing Program After the Washing Program Ends Change Spin Speed / Select Rinse Hold If necessary, change the spin speed for the final Opening and Closing the Filling Door Add the Washing If using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agent Start the Washing Program Completion of the Washing ProgramChanging a Washing Program Program Sequence Display Select the Additional Program Change the Spin Speed Washing Cycle Ended/Remove Washing Program Tables Washing EASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if Adjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained off Emergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for Installation Transporting the Unit Setting Up the UnitRemove the Transport Safeguard Close off the hole with the plug cap G Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Index Service When do you incur costs even during the warranty period?