Washing Cycle Ended/Remove Washing | AEG 72330 guide

Instructions for use

Washing Cycle Ended/Remove Washing

After a washing program has ended, END (EINDE, FIN) lights up on the program sequence display.

If you selected RINSE HOLD (GEEN CENTR., SANS ESSOR.), the indicator next to the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) flashes.

01. After a rinse hold, it is first necessary to pump off the water:

–Either press the button START/PAUSE (START/PAUZE, MARCHE/ PAUSE) (water is pumped off and the washing is spun according to the program which has just run; after the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) is pressed again, the spin speed can also still be changed during spinning),

or

–turn the program selector to PUMP (POMPEN, VINDAGE) and press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) (water is pumped off without spinning),

or

–turn the program selector to SPIN (CENTRIFUG., ESSORAGE) or SHORT SPIN (KORT CENTRIFUG., ESSOR. DELICAT) and press the button

START/PAUSE (START/PAUZE, MARCHE/PAUSE) (water is pumped off and the washing is spun or gently spun).

The indicator END (EINDE, FIN) lights up after the end of this program step.

2.Open the filling door.

The filling door can be opened as soon as the indicator DOOR (DEUR, PORTE) lights up green.

3.Remove the washing.

4.Turn the program selector to OFF (UIT, ARRET).

5.Close the water valve.

6.After washing, pull out the washing detergent drawer slightly so that it can dry out. Only lean the door against the washing machine so that the latter can air out.

3	If the display OVER DOSING (OVERDOS., SURDOSAGE)	OVERDOS.
3	lights up, too much washing detergent was used in the	SURDOSAGE
	washing program just ended. During the next wash, pay

attention to the dosing information of the washing detergent manufacturer and pay attention to the filling quantity!

Attention! If the washing machine is not used for a long time: Close the water tap and disconnect the washing machine from the electricity mains.

24

Image 24

AEG 72330 manual Washing Cycle Ended/Remove Washing

Contents

ÖKO-LAVAMAT 72330 update Dear customer Tel /3630444 Contents Remedying Faults What to do if Contents Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General Safety Disposal Environment TipsDispose the packing material Dispose the old appliance Unit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program Selector EASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P Handwash Additional Program Buttons PRE Wash VOORWAS, Prelav Consumption Values and Time Requirements What Does Update Mean? Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerWater Hardness Details Run a Washing Cycle Brief InstructionsSet the Washing Program After the Washing Program Ends Change Spin Speed / Select Rinse Hold If necessary, change the spin speed for the final Opening and Closing the Filling Door Add the Washing If using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agent Start the Washing Program Completion of the Washing ProgramChanging a Washing Program Program Sequence Display Select the Additional Program Change the Spin Speed Washing Cycle Ended/Remove Washing Program Tables Washing EASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if Adjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained off Emergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for Installation Setting Up the Unit Remove the Transport SafeguardTransporting the Unit Close off the hole with the plug cap G Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Page Index Service When do you incur costs even during the warranty period?