Compensate for Floor Unevenness | AEG 72330 guide

Setting up and connection instructions

Compensate for Floor Unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the

threaded foot as far as it will go.

2. Adjust the screw feet so that the unit is horizontal and stable. The unit must not wobble over when loaded.

3. If necessary, check the setting with a spirit level.

Attention! Never compensate for minor floor unevenness with underlays made of wood, card etc. Always adjust the adjustable feet.

44

Image 44

AEG 72330 manual Compensate for Floor Unevenness

Contents

ÖKO-LAVAMAT 72330 update Dear customer Tel /3630444 Contents Remedying Faults What to do if Contents Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General Safety Disposal Environment TipsDispose the packing material Dispose the old appliance Drawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Program Selector EASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P Handwash Additional Program Buttons PRE Wash VOORWAS, Prelav Consumption Values and Time Requirements What Does Update Mean? Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener Run a Washing Cycle Brief InstructionsSet the Washing Program After the Washing Program Ends Change Spin Speed / Select Rinse Hold If necessary, change the spin speed for the final Opening and Closing the Filling Door Add the Washing If using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agent Start the Washing Program Completion of the Washing ProgramChanging a Washing Program Program Sequence Display Select the Additional Program Change the Spin Speed Washing Cycle Ended/Remove Washing Program Tables Washing EASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if Adjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained off Emergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for Installation Transporting the Unit Setting Up the UnitRemove the Transport Safeguard Close off the hole with the plug cap G Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Index Service When do you incur costs even during the warranty period?