Cleaning and Care, Washing Detergent Drawer | AEG 72330 specs

Instructions for use

Cleaning and Care

Control Panel

Attention! For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents.

0Wipe off control panels with a damp cloth. Use warm water to do this.

Washing Detergent Drawer

The washing detergent drawer should be cleaned from time to time.

01. Pull out the washing detergent drawer as far as it will go.

2.Remove the washing detergent drawer with a firm pull.

3.Remove the softener insert from

the middle compartment.

4. Clean the softener insert under running water.

5. Clean the compartments from the rear with warm water.

It is best to use a bottle brush.

6.Push on the softener insert as far as it will go so that it is secure.

28

Image 28

AEG 72330 manual Cleaning and Care, Washing Detergent Drawer

Contents

ÖKO-LAVAMAT 72330 update Dear customer Tel /3630444 Contents Remedying Faults What to do if Contents Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General Safety Disposal Environment TipsDispose the packing material Dispose the old appliance Front View Unit DescriptionDrawer for Washing Powder and Care Agent Control Panel Program Selector EASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P Handwash Additional Program Buttons PRE Wash VOORWAS, Prelav Consumption Values and Time Requirements What Does Update Mean? Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent?Water Hardness Details Run a Washing Cycle Brief InstructionsSet the Washing Program After the Washing Program Ends Change Spin Speed / Select Rinse Hold If necessary, change the spin speed for the final Opening and Closing the Filling Door Add the Washing If using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agent Start the Washing Program Completion of the Washing ProgramChanging a Washing Program Program Sequence Display Select the Additional Program Change the Spin Speed Washing Cycle Ended/Remove Washing Program Tables Washing EASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if Adjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained off Emergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for Installation Remove the Transport Safeguard Setting Up the UnitTransporting the Unit Close off the hole with the plug cap G Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Page Index Service When do you incur costs even during the warranty period?