Setting the Child Safety Feature | AEG 72330 guide

Instructions for use

Child Safety Feature

When the child safety feature is used, the filling door can no longer be closed and no more washing programs can be started.

Setting the Child Safety

Feature:

0 Use a coin to turn the rotary knob (on the inside of the filling door) clockwise as far as it will go.

1Warning! The rotary knob must not be pressed in following adjust-

ment, otherwise the child safety feature is not active. The rotary knob must project as shown in the diagram.

Cancelling the Child Safety

Feature:

0Turn the rotary knob anticlockwise as far as it will go.

39

Image 39

AEG 72330 manual Setting the Child Safety Feature, Cancelling the Child Safety Feature

Contents

ÖKO-LAVAMAT 72330 update Tel /3630444 Dear customer Contents What to do if Remedying Faults Contents Safety Before Putting into Operation for the First TimeCorrect Use General Safety Child Safety Dispose the old appliance DisposalEnvironment Tips Dispose the packing material Unit Description Front ViewDrawer for Washing Powder and Care Agent Program Selector Control Panel Woollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, Defroissable PRE Wash VOORWAS, Prelav Additional Program Buttons Consumption Values and Time Requirements Before the First Wash What Does Update Mean? Sort and Prepare the Washing Prepare the Washing Cycle Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerWater Hardness Details After the Washing Program Ends Run a Washing CycleBrief Instructions Set the Washing Program If necessary, change the spin speed for the final Change Spin Speed / Select Rinse Hold Add the Washing Opening and Closing the Filling Door Compartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for in-wash stain treatment Program Sequence Display Start the Washing ProgramCompletion of the Washing Program Changing a Washing Program Change the Spin Speed Select the Additional Program Washing Cycle Ended/Remove Washing Washing Program Tables EASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum What to do if Remedying Faults Adjust in accordance with Sans Repassage Rinsing water is Cause is probably a If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washing Carry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution Pump Emergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection Instructions Setting Up the Unit Remove the Transport SafeguardTransporting the Unit Close off the hole with the plug cap G Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Page Index When do you incur costs even during the warranty period? Service