AEG 76730 3 , 3

Instructions for use

Soaking Duration

With the SOAKING (INWEKEN, TREMPAGE) button pressed, you can

extend the soaking duration with the button DELAY TIMER (STARTTIJD-

KEUZE, DEPART DIFFERE) (maximum 10 hours and approx. 20 min.).

3 Without delay timer, the soaking duration is approx. 30 minutes, plus a

pre-wash time of approx. 20 minutes.

0 To set, press the button DELAY TIMER (STARTTIJDKEUZE, DEPART

DIFFERE) as often as necessary until the required soaking duration is

shown in the multidisplay, e.g.1h (= 1 hour).

After approx. 2 seconds, the multidisplay

shows the run time in minutes.

This run time is comprised as follows:

3 While SOAKING (INWEKEN, TREMPAGE) is running, PRE WASH (VOOR-

WAS, PRELAV.) lights up on the program sequence display.

selected soaking period e.g. 1h=60 minutes

+ heating up/prewash period e.g. approx. 20 minutes

+ run time of the selected washing program e.g. approx. 129 minutes

=displayed value e.g. approx. 209 minutes

Contents

Main Dear customer, 1 3 2 CONTENTS Instructions for use Setting up and connection instructions Page INSTRUCTIONS FOR USE 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control Panel Program Selector 2 3 Additional Program Buttons Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua Control Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergent and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Set the Washing Program 3 Change Spin Speed / Select Rinse Hold 3 Set the Delay Timer/Soaking Duration Delay Timer Soaking Duration 3 This run time is comprised as follows: 3 Opening and Closing the Filling Door 3 Add the Washing 3 Add Washing Detergent/Care Agent 3 Start the Washing Program 3 Completion of the Washing Program 3 Changing a Washing Program 3 Washing Cycle Ended/Remove Washing Program Tables Washing Page Separate Conditioning/Starching /Impregnating Separate Rinse Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Clean the Solution Pump 1 Emergency Unlocking of the Filling Door Additional Rinse (RINSE+/SPOELEN+/RINCAGE+) 3 Child Safety Feature 1 SETTING UP AND CONNECTION INSTRUCTIONS Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Page Page INDEX SERVICE