AEG 76730 Child Safety Feature

Instructions for use

Child Safety Feature

When the child safety feature is

used, the filling door can no

longer be closed and no more

washing programs can be started.

Setting the Child Safety

Feature:

0 Use a coin to turn the rotary knob

(on the inside of the filling door)

clockwise as far as it will go.

1 Warning! The rotary knob must

not be pressed in following adjust-

ment, otherwise the child safety

feature is not active. The rotary

knob must project as shown in the

diagram.

Cancelling the Child Safety

Feature:

0 Turn the rotary knob anticlockwise

as far as it will go.

Contents

Main Dear customer, 1 3 2 CONTENTS Instructions for use Setting up and connection instructions Page INSTRUCTIONS FOR USE 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control Panel Program Selector 2 3 Additional Program Buttons Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua Control Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergent and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Set the Washing Program 3 Change Spin Speed / Select Rinse Hold 3 Set the Delay Timer/Soaking Duration Delay Timer Soaking Duration 3 This run time is comprised as follows: 3 Opening and Closing the Filling Door 3 Add the Washing 3 Add Washing Detergent/Care Agent 3 Start the Washing Program 3 Completion of the Washing Program 3 Changing a Washing Program 3 Washing Cycle Ended/Remove Washing Program Tables Washing Page Separate Conditioning/Starching /Impregnating Separate Rinse Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Clean the Solution Pump 1 Emergency Unlocking of the Filling Door Additional Rinse (RINSE+/SPOELEN+/RINCAGE+) 3 Child Safety Feature 1 SETTING UP AND CONNECTION INSTRUCTIONS Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Page Page INDEX SERVICE