Start the Washing Program | AEG 76730 guide

Instructions for use

Start the Washing Program

0 1. Check that the water valve is open.

2. Start the washing program: Press the button

START/PAUSE (START/PAUZE, MARCHE/PAUSE). The washing program is started or it starts after the set time expires.

3	The filling door is not correctly closed if, when the button START/PAUSE
	(START/PAUSE, MARCHE/PAUSE) is pressed,

– the indicator DOOR (DEUR, PORTE) flashes red

– the fault code E40 in the multidisplay flashes

– and the indicator MAIN WASH (HOOFDWAS, LAVAGE) flashes.

In this case, press the filling door firmly closed and again press the but- ton START/PAUSE (START/PAUZE, MARCHE/PAUSE).

If the time preselection is set:

A set time preselection runs and the remaining time until the program start is displayed (in each case in full hours, e. g. 5h). During this time you can load washing or change/abort the time preselection.

• Load washing: Press the button START/PAUSE (START/PAUZE, MARCHE/ PAUSE). The filling door can be opened. Next, close the door and again press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE).

• Change or abort time preselection: Press the button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) as often as necessary until the required time is displayed; when the program run time is displayed (display in minutes, e. g.129), the washing program starts without delay.

24

Image 24

AEG 76730 manual Start the Washing Program, START/PAUSE, MARCHE/PAUSE is pressed, If the time preselection is set

Contents

ÖKO-LAVAMAT 76730 update Dear customer Contents Remedying Faults What to do if Contents Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General Safety Disposal Environment TipsDispose the packing material Dispose the old appliance Unit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorMain washing cycle Cottons/Linen at 30 C to 95 C Time cannot be combined with Quick WASH/KORT/COURT Woollens WOL, LAINE/P Handwash Additional Program Buttons Shorter washing cycle for slightly dirty washingEffect Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua Control Before the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water Softener Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Set the Washing Program Press the button again to deselect Set the Delay Timer/Soaking Duration Change Spin Speed / Select Rinse HoldPer minute Hours Soaking Duration Pre-wash time of approx minutes= displayed value WAS, PRELAV. lights up on the program sequence display Opening and Closing the Filling Door Add the Washing If using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softener Start the Washing Program START/PAUSE, MARCHE/PAUSE is pressedIf the time preselection is set Completion of the Washing Program Program Sequence DisplayMulti-Display Changing a Washing Program Changing or aborting a programSelect the Additional Program Change the Spin Speed Washing Cycle Ended/Remove Washing Program Tables Washing EASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if RINCAGE+ flashes Water Sans Repassage Washing detergent If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offMachine and pull out the mains plug Out Emergency Emptying Emergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for Installation Setting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the Unit Firmly pull both hose holders off the unit Close off the hole with the plug cap G Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mmPage Page Index Service When do you incur costs even during the warranty period?