AEG 76730 3 , 3

Instructions for use

22

Opening and Closing the Filling Door

0 Open: Pull on the handle of the filling door.

0 Close: Press the filling door firmly closed.

The displays DOOR (DEUR/PORTE) and START/

PAUSE (START/PAUZE, MARCHE/PAUSE) show

whether the door can be opened while the

appliance is switched on:

3 If

–the display DOOR (DEUR, PORTE) flashes red

–then the error code E40 flashes in the multidisplay

–and the display MAIN WASH (HOOFDWAS, LAVAGE) flashes

you tried to start a washing program without first closing the main

door properly. In this case push the door shut firmly and restart the

washing program.

Add the Washing

3 For the maximum filling quantities, refer to the ”Program Tables”.

For information on the correct preparation of the washing, see ”Sort

and Prepare the Washing”.

0 1.Sort and prepare the washing according to type.

2. Open the filling door: Pull on the handle of the filling door.

3. Fill with washing.

Attention! When closing the door, make sure no items of washing get

stuck! This could damage textiles and the unit.

4. Close the filling door securely.

Display DOOR

(DEUR, PORTE)

Display START/PAUSE

(START/PAUZE, MARCHE/PAUSE)

Opening door

possible?

Glows green Flashes red Yes

Glows green Glows red

Yes, after pressing button

START/PAUSE (START/

PAUZE, MARCHE/PAUSE)

Is off Flashes or glows red No1)

1)The main door is locked because of a high water level or a high temperature.

Contents

Main Dear customer, 1 3 2 CONTENTS Instructions for use Setting up and connection instructions Page INSTRUCTIONS FOR USE 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control Panel Program Selector 2 3 Additional Program Buttons Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua Control Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergent and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Set the Washing Program 3 Change Spin Speed / Select Rinse Hold 3 Set the Delay Timer/Soaking Duration Delay Timer Soaking Duration 3 This run time is comprised as follows: 3 Opening and Closing the Filling Door 3 Add the Washing 3 Add Washing Detergent/Care Agent 3 Start the Washing Program 3 Completion of the Washing Program 3 Changing a Washing Program 3 Washing Cycle Ended/Remove Washing Program Tables Washing Page Separate Conditioning/Starching /Impregnating Separate Rinse Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Clean the Solution Pump 1 Emergency Unlocking of the Filling Door Additional Rinse (RINSE+/SPOELEN+/RINCAGE+) 3 Child Safety Feature 1 SETTING UP AND CONNECTION INSTRUCTIONS Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Page Page INDEX SERVICE