Instructions for use

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.

• If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below).

After remedying the fault, press the button START/PAUSE (START/ PAUZE, MARCHE/PAUSE). If the fault code is shown again, inform Customer Service.

In the case of all other displayed faults (E and number or letter), please inform the Customer Service and state the fault code.

Problem

Possible Cause

Remedy

 

The mains plug is not

Plug in the mains plug.

 

plugged in.

 

 

 

The fuse of the building's

Replace the fuse.

 

wiring is not in order.

 

 

The washing machine

The filling door is not cor-

Close the filling door; the

does not work.

rectly closed.

lock must engage audibly.

 

 

The button START/PAUSE

Press the button START/

 

(START/ PAUZE, MARCHE/

PAUSE (START/ PAUZE,

 

PAUSE) was not pressed for

MARCHE/PAUSE) until the

 

long enough.

program begins.

The filling door cannot

 

Cancel the child lock

The child lock is set.

(see section „Child Safety

be closed.

 

Feature").

 

 

Fault code E40

 

 

appears. The indicator

The filling door is not

Close the filling door cor-

MAIN WASH (HOOFD-

correctly closed.

rectly. Restart the program.

WAS, LAVAGE) flashes.

 

 

 

 

 

33

Page 33
Image 33
AEG 76730 manual What to do if, Remedying Faults