Instructions for use
36
Water is not entering.
Error code (1 ap-
pears.
Water tap is switched Off Open water tap.
Filter in the socket of the in-
flow hose connection is
blocked.
Close water tap. Disconnect
hose from water tap, remove
filterand clean under
running water.
Water tap is full of lime or
defective.
Check water tap, if necessary
have it repaired.
Washing machine vi-
brates during operation
or is unsteady.
Transport safeguard has not
been removed.
Remove transport safeguard
according to setting up and
connection instructions.
The height adjustable
threaded feet are not
correctly adjusted.
Align feet according to
setting up and connection
instructions.
There is very little washing in
the drum (e.g. only a dressing
gown).
Function is not affected by
this.
Water could not be fully
pumped out before spinning
because drainage hose is
kinked or water pump is
blocked.
Move the path of the hose
and, if necessary, remove
kink or clean water pump
and, if necessary, remove
foreign body from pump
housing.
Wash water of the
mainwashing foams
strongly.
Probably too much washing
agent has been filled in.
Dose washing agent exactly
according to manufacturers
instructions.
Problem Possible cause Remedy