Instructions for use
44
Cancel additional rinse cycle
0 1.Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE
DELICAT).
2. Keep button DELICATES (BEHOEDZAAM, SENSITIVE) depressed for at
least 5 seconds.
Immediately on pressing the button, RINSE+ (SPOELEN+, RINCAGE+)
blinks on the programme cycle display. After 5seconds RINSE+
(SPOELEN+, RINCAGE+) will stop blinking and lights up constantly for a
further 5 seconds.
3. Whilst RINSE+ is lit up constantly, release the DELICATES (BEHOED-
ZAAM, SENSITIVE) button.
After RINSE+ (SPOELEN+, RINCAGE+) has stopped lighting up, the ad-
ditional rinse cycle is canceled.
3 With the use of the additional rinse cycle, the water consumption and
programme duration increases.
Water cooling
It may be necessary to cool the wash water before pumping out in or-
der to prevent damage to plastics draining pipes.
3 The wash water is cooled before pumping out at the end of the main
wash cycle (by the addition of cold water).
(This setting is only effective for the programme COTTON/LINEN,
EASY-CARE (WITTE/BONTE WAS, BLANC/COULEURS,
KREUKHERSTELLEND, DEFROISSABLE) with a temperature over 40 °C.)
When supplying the appliance, no water cooling is set except for the
additional programme DELICATES (BEHOEDZAAM, SENSITIVE).
Setting water cooling:
0 1.Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE
DELICAT).
2. Keep the PRE WASH (VOORWAS, PRELAV.) button depressed for at least
5 seconds.
After the button has been depressed for 5 seconds, the MAIN WASH
(HOOFDWAS, LAVAGE) will blink on the programme cycle display for 5
seconds.
3. Whilst MAIN WASH (HOOFDWAS, LAVAGE) blinks,
release PRE WASH (VOORWAS, PRELAV.) button.
When the blinking has stopped, the water cooling is set. It remains set
until it is canceled.