Instructions for use
45
4. if you want to check whether the water cooling is set:
–Turn the programme knob to SHORT SPIN (KORT CENTRIFUG.,
ESSORAGE DELICAT).
–Press the PRE WASH (VOORWAS, PRELAV.) button briefly.
If the MAIN WASH (HOOFDWAS, LAVAGE) blinks on the programme cy-
cle display, then the water cooling is set.
Cancel water cooling:
0 1.Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE
DELICAT).
2. Keep the PRE WASH (VOORWAS, PRELAV.) button depressed for at least
5 seconds.
Immediately after the button is pressed, MAIN WASH (HOOFDWAS,
LAVAGE) will blink on the programme cycle display. After 5seconds
MAIN WASH (HOOFDWAS, LAVAGE) will stop blinking and will remain
lit constantly for 5 seconds.
3. Whilst MAIN WASH (HOOFDWAS, LAVAGE) is constantly lit, release the
PRE WASH (VOORWAS, PRELAV.) button. The water cooling is canceled
after MAINWASH (HOOFDWAS, LAVAGE) stops blinking,
3 Due to the water cooling the water consumption and and the pro-
gramme duration increase .
Additional rinse cycle and water cooling
Additional rinse cycle and water cooling can be combined. Setting as
for „Additional Rinse Cycle“ and „Water Cooling“.