40What to do if …
Problem | Possible cause | Remedy |
|
|
|
lights up | Unsuitable cookware | Use suitable cookware |
| No cookware on the cooking | Place cookware on the cooking |
| zone | zone |
| The diameter of the bottom of | Move onto a smaller cooking |
| the cookware is too small for | zone |
| the cooking zone | Use suitable cookware |
|
| |
lights up | Overheating protection for the | Switch off the cooking zone. |
| cooking zone has been trig- | Switch the cooking zone on |
| gered | again |
| Automatic | Switch appliance off. Switch |
| been triggered | appliance on again |
and number are displayed | Electronics fault | Disconnect the appliance from |
|
| the electrical supply for a few |
|
| minutes (Take the fuse out of |
|
| the house’s wiring system) |
|
| If after switching on again, |
|
| is displayed again, call the cus- |
|
| tomer service department |
|
|
|
If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre.
1Warning! Repairs to the appliance are only to be carried out by qualified service engi- neers. Considerable danger to the user may result from improper repairs.
3If the appliance has been operated incorrectly, the engineer's visit will be chargeable, even during the warranty period.
Operating noises
Depending on the material and the processing of the base, the following noises may oc- cur when using induction cooking zones.
•Cracking noise (1)
when using cookware made of different materials (Sandwich construction)
•Whistling (1)
when using an individual cooking zone or several cooking zones with high powers when the cookware is made of different materials (Sandwich construction)
•Humming (2)
can occur at high power levels
•Clicking (2)
during electric switching processes
•Hissing, buzzing (3)
The device is fitted with a fan for cooling the electrics. A whiring noise can be heard when operating the fan which may deviate depending on the performance and may continue for a while after the appliance is switched off.
The noises described are normal and do not refer to any defects.
