AEG 88131 K-MN user manual Operating the appliance, Switching the appliance on and off

Operating the appliance
	29

Operating the appliance

3Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

	Control panel		Display	Pilot light
Switch on	Touch	for 2 seconds	/	lights up
Switch off	Touch	for 1 second	/ none	goes out

3After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

	Control bar	Display
To set the heat set-	Touch the desired heat setting, if neces-	to	/
ting	sary, correct to the left or the right
To switch off	Touch 0

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

	Control panel	Display
Switch on	Touch	(for 4 seconds)
Switch off	Touch	previously set heat setting

3When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode then back to the heat setting they were at before.

	Control panel	Display
To switch on	Touch
To switch off	Touch	Previous heat setting (not automatic
		warm-up or power function)

3STOP+GO does not stop timer functions.

3STOP+GO controls the entire control panel apart from the sensor field .