13

13.1Caller display list

This phone automatically stores the last 99 calls received. The calls list is saved even if the mains power is removed, but new caller information will not be displayed or saved unless the mains power is on. When the caller display list is full, the new caller display entry will replace the oldest record. “NEW/CALLS” will alternate on the display to show that you have a new caller display call stored in memory. The alternating “NEW” display will only stop after all new caller display records have been viewed.

13.2Viewing the caller display list

tWith the phone in standby mode, press the caller display button .

>The display shows the most recent record. If there are no caller display records, the display will show “NO CALLS“.

>The message icon will be on if the caller has recorded a message on the answering machine. tPress the up or down button to scroll to the next caller display record.

>The display shows “END OF LIST” upon reaching the end of the first and last record

tPress the stop button to return to standby mode or wait until the program times out.

13.3To return a call from the caller’s list

tWhen the caller display record is displayed, lift the handset or press the speakerphone button . >The phone automatically dials the displayed record, using the handset or speakerphone mode

selected.

13.4Storing an incoming call record into the phonebook memory

tWhen viewing the caller display records, press the up or down button to find the record you wish to store.

tWhen the record is displayed, press the phonebook button .

>The display shows the cursor blinking on the first digit of the number.

>To modify the number, press the up or down button to move the cursor to the number you want to change, then input the new one or press the delete button to delete.

tPress the OK button to confirm.

tInput the name. See „12.2 To add a new record into the phonebook“ for entering letters.

>To modify an existing name, press the up or downbutton to move the cursor to the character you want to change then input the new one or press the delete button to delete.

tPress the OK button again to save the caller display record into the phonebook memory.

13.5To delete a caller display record

tWhen the caller display record is displayed, press the delete button . >The display prompts “DELETE CALL?”

tPress the OK button to confirm.

tPress the stop button to return to the standby mode.

13.6To delete all caller display records

tWhen the caller display record is displayed, press and hold the delete button . >The display prompts “DEL ALL CALLS?”

tPress the OK button to confirm.

>The display automatically returns to standby mode.

tOR press the stop button to cancel and return to the standby mode.

Page 14
Image 14
AEG C115 manual