5
Speakerphone
Appears when the speakerphone function is turned on.
XXIndicates the total number of answering machine messages recorded (XX from
MESSAGES | 00 to 59) and the total number of caller display records saved (YY from 00 to 99) | |
YY | ||
| ||
CALLS |
|
XXFlashing alternately with the screen above, indicates the number of new
NEW answering machine messages recorded and the number of new caller display
YY | records received. | |
NEW | ||
|
6INSTALLATION
1. Locating the base unit (see P2 and P3).
The base unit should be placed on a level surface, in a position where:
tThe mains adapter plug will reach an easily accessible
tThe telephone line cable will reach your telephone line socket or extension socket. tIt is not close to a sink, bath or shower, or anywhere else where it might get wet.
tIt is not close to other electrical equipment - fridges, washing machines, microwave ovens, TVs, fluorescent lights, etc.
2.Plug the coiled handset cord into the handset. Plug the other end into the socket on the side of the base unit.
3.Place the handset on the base unit.
4.Plug the telephone line cord into the phone line socket at the back of the base unit. Plug the other end into your telephone line socket or extension socket.
5. Plug the power supply cord into the power jack at the back of the base unit. Plug the other end into a 230 V AC, 50 Hz mains socket, with the switch on the socket set to off.
6.Switch on the mains power at the socket. Wait while the display shows “INITIALISATION”, then the announcement “Answering machine on. Announcement one.” before the display changes to the standby screen.
7.Lift the handset and check for dial tone in the earpiece.
Note:
tThe base unit doesn’t require a battery.
tAlways use the telephone line cord supplied with your phone. Other telephone line cords may not work.
