8

tPress the OK button to confirm.

tContinue with programming, or press the stop button to return to standby mode.

8.4LCD contrast

tPress the menu button .

>The display shows “OPTIONS MENU“.

tPress the up or down button until de display shows “LCD CONTRAST”.

tPress the OK button to confirm.

tPress the up or down button to select your comfortable display viewing level (1-5). The default setting is 3.

tPress the OK button to confirm.

tContinue with programming, or press the stop button to return to standby mode.

8.5Message length

To set the maximum recording time for each incoming message or memo message on the answering machine.

tPress the menu button .

>The display shows “OPTIONS MENU“.

tPress the up or down button until de display shows “MESSAGE LENGTH”.

tPress the OK button to confirm.

tPress the up or down button to select 1 or 2 minutes. >The default setting is 2 minutes.

tPress the OK button to confirm.

tContinue with programming, or press the stop button to return to standby mode.

8.6Rings to answer

To set the number of rings before the machine answers a call. tPress the menu button .

>The display shows “OPTIONS MENU“.

tPress the up or down button until de display shows “RINGS TO ANSWER”.

tPress the OK button to confirm.

tPress the up or down button to select “TOLL SAVER”, “2”, “3”, “4”, “5”, “6”, “7” , “8” or “9” rings.

>The default setting is 5.

>Use “TOLL SAVER” when checking your Voxtel C115 for messages from a remote location using a long distance service or from a pay phone. The answering machine responds after the 2nd ring only if you have a new message recorded. If there are no new messages, the phone will answer after the 4th ring. You can then hang up after the 3rd ring to avoid paying for the call.

tPress the OK button to confirm.

tContinue with programming, or press the stop button to return to standby mode.

8.7Remote access

The remote access requires a three-digit code that you need to enter if you call when away from home to check your messages. The default is “321“. You can change it to any three digits you want. tPress the menu button .

>The display shows “OPTIONS MENU“.

tPress the up or down button until de display shows “REMOTE ACCESS”.

tPress the OK button to confirm.

>The current three-digit code is shown, with the first digit blinking.

tPress the up or down button to set the first digit of the remote access code.

tPress the OK button to confirm.

>The second digit of the code will be blinking.

tPress the up or down button to set the second digit of the remote access code.

UK

Page 9
Image 9
AEG C115 manual