Operating instructions
15
Detergent and conditioner
Which detergent and conditioner?
Use only detergents and conditioners which are suitable for use in
washing machines. Always observe the manufacturer’s instructions.
How much detergent and conditioner?
The required quantity depends upon:
• the amount of washing
2 If the detergent manufacturer does not include dosing instructions for
reduced loads, use one third less for half loads and only half of the full
load detergent quantity for very small loads.
• extent of soiling of the washing
• hardness of tap water
Observe instructions for use and dosing provided by the detergent and
conditioner manufacturer.
Using Water Softener
In the ca se of med ium to ve ry hard w ater (fro m hardne ss band I I) water
softener should be used. Observe the manufacturer’s instructions! Then
always use detergent dosing for hardness band I (=soft). Information
on the hardness of the water in your area is provided by your local
water board.
Information on Water Hardness
Hardness Band Water hardness in °dH
(German hardness scale)
Water hardness in mmo l/l
(millimol per litre)
I – soft 0 – 7 to 1.3
II – medium-hard 7 – 14 1.3 – 2.5
III – hard 14 – 21 2.5 – 3.8
IV – very hard greater than 21 greater than 3.8