Operating Instructions

Problem

Possible Cause

Remedy

 

The transport packaging has

Remove transport packaging

 

according to the installation

 

not been removed.

 

and connection instructions.

 

 

 

The height-adjustable screw

Adjust the feet according to

 

the instructions for installa-

 

feet are not correctly set.

 

tion and connection.

 

 

The washing machine

There is very little washing in

This does not impair the

vibrates during opera-

tion or wobbles.

the drum (e.g. only one

function.

dressing gown).

 

 

 

The water could not be com-

Check along the drain hose

 

and remove any kinks

 

pletely pumped out before

present, or clean the drain

 

spinning because

 

pump and, if necessary, re-

 

the drain hose is bent or

 

move foreign bodies from

 

the drain pump is blocked.

 

the pump housing.

 

 

 

The screw connection on the

Tighten the inlet hose screw

 

inlet hose is leaky.

connection.

 

The drain hose leaks.

Check the drain hose and re-

 

place it if necessary.

 

 

 

The drain pump cover is not

Close cover correctly.

 

correctly closed.

 

 

Water runs out under

 

Interrupt the programme

 

and remove washing from

the washing machine.

Washing is stuck in the door.

the door. Start the pro-

 

 

 

gramme again.

 

 

Seal the emergency drain

 

 

hose correctly (see section

 

Emergency drain hose is not

“Carrying out an Emergency

 

correctly sealed or is leaking.

Emptying Operation“). If the

 

 

emergency drain hose leaks

 

 

contact customer service.

 

o(RINSE HOLD) has been

Cancel o(RINSE HOLD).

The washing machine

selected.

 

 

 

does not spin; there is

Soaking programme has fin-

Release q(SOAKING) but-

water in the drum.

ton (main wash programme

 

ished.

 

will follow).

 

 

 

 

 

30

Page 30
Image 30
AEG W 730 manual Feet are not correctly set