Operating Instructions
18
Running a Wash Cycle

Brief Instructions

To run a wash cycle:
0 1.Open the door and fill with washing.
2. Close the door.
3. Add washing detergent / care agent.
4. Set the wash programme
Set the programme using the programme knob;
Set the temperature using the temperature selector;
Set any additional programme required.
5. If necessary, change the spin speed or select o (RINSE HOLD).
You can alter this setting and the temperature at any time during the
wash.
6. Press M (ON/OFF) button. Power indicator light comes on.
The washing machine has been switched on. The wash programme will
start.
When the wash programme has been completed:
Important! If the wash cycle ends on rinse hold run v 15 (PUMP OUT)
or Position 5 or 10 (SPIN) before opening the door.
3 For safety reasons, the door remains locked for 1-2 minutes after the
end of the programme.
7. Open the door and remove the washing.
8. Press M (ON/OFF) button. The power indicator light will go out.
The washing machine is switched off.

Add the washing

3 For the maximum filling quantities, see the "Program tables".
See "Sort and prepare washing" for information on correctly preparing
the washing.
0 1.Sort and prepare the washing according to type.
2. Open the filling door: Pull on the handle of the filling door.
3. Fill with washing.
Important! When closing the door, make sure no items of washing get
stuck! This could damage textiles and the unit.
4. Close the filling door securely.