Aga Ranges 6-4 Series LEVELLING AND MOBILITY WHEELS

INSTALLATION/LEVELLING
The 6-4 Series is designed to stand on a flat and level surface, however, any unevenness may
be overcome by adjusting the four levelling feet, one at each corner of the base plate. The
adjusting screws are accessed by removing left and right hand hotplate castings (See section
‘To Remove Hotplate Castings - Servicing Section Page 48). To raise the cooker turn screw
clockwise, to lower turn screw counter-clockwise.
There are rollers on the base of the cooker to allow for positioning.
When the cooker is in the correct position the four levelling feet can be adjusted to level the
cooker. The feet must be lowered enough to prevent the cooker rolling out of position. (See Fig.
5)
13
DESN 512391 BFig. 5
LEVELLING AND MOBILITY WHEELS