Export

This function takes the data captured and exports it in .csv format to a location the user selects.

Repetitive Run

This function allows the user to set-up the tool to trigger the logic analyzer a predefined number of times and capture data incrementally on each run. Please note this function does not work in Off Line mode.

Timing Analysis

This window tab provides an analysis of each Data bit’s window during every data burst across an entire TimingZoom trace. The user can set a threshold criteria in this window and then select whether the data windows to be identified should be equal to, greater than or equal to, or less than or equal to that value. All Data bits during any burst captured in a TZ trace will be listed in the Timing Analysis window.

Additionally, the tool provides some overall statistics on what was measured in the TZ trace that was analyzed. This includes the number of Read and Write strobes analyzed, the % of data strobes with data transitions occurring; as well as, the maximum, minimum and average Data Bit widths across ALL bits during ALL bursts in the TZ trace.

Export

This function takes the data captured and exports it in .csv format to a location the user selects.

30

Page 30
Image 30
Agilent Technologies FS2334 user manual Export, Timing Analysis