Agilent Technologies U2121A-101 manual Launch the Agilent U2121A-Based RF Switch Driver Software

WA RN I N G	The total allowable current is 1500 mA. Please ensure that the total current
	consumption is not more than 1500 mA.

[1]SL1 to SL5 refers to the 8762/3/4 and 8765x-324 RF switch connectors for Ch1 to Ch5.

[2]X1 to X5 refers to the 8765x-024 RF switch connectors for Ch1 to Ch5.

[3]SV1 to SV5 refers to the N181x RF switch connectors for Ch1 to Ch5.

[4]X7 refers to the connector for general I/O on the switch driver board.

[5]X8 refers to the connector for general output on the switch driver board.

[6]X9 refers to the connector for general input on the switch driver board.

D.Launch the Agilent U2121A-Based RF Switch Driver Software

N O TE

Before you proceed, ensure that your system meets the minimum system requirements.

1Before attempting to start- up your U2121A- Based RF Switch Driver Software, it is recommended to follow the step- by- steps instructions below.

2Plug in your instrument via the supported USB socket.

3Go to Start > All Programs > Agilent IO Libraries Suite > Agilent Connection Expert to launch the Connection Expert.

4The detected U2121A will be visible on the Instrument I/O on this PC explorer pane. Right- click on the U2121A instrument on the explorer pane.

5A context menu will appear as shown below. Select Send Commands To This Instrument.

U2121A-101 Operating Guide 15