ENGLISH

11.(Figure 8) Position the height adjustment handle side to side so that the tooth lock washer (M) can fi t between the handle and the height adjustment strap. Tighten the nuts securing the height adjustment handle.

12.(Figure 8) Insert the 5/16" x 3/4" carriage bolt (E) through the height adjustment handle. Assemble onto the bolt, in order, the 5/16" tooth-lock washer (M), the height adjustment strap, a 5/16" fl at washer (J) and the plastic knob.

5/16" FLAT

8

 

WASHER (J)

PLASTIC

5/16" x 3/4"

KNOB

CARRIAGE BOLT (E)

 

TOOTH LOCK

WASHER (M)

2.(Figure 10) Insert the two upper hopper side tubes through the stitched fl aps on each side of the hopper bag.

3.(Figure 10) Assemble the ends of the rear hopper tube onto the ends of the upper hopper side tubes. Fasten together using plastic plugs (Z).

PLASTIC PLUG (Z)

10

 

 

UPPER HOPPER

SIDE TUBE

ASSEMBLY OF HOPPER BAG

1.(Figure 9) Turn a rear hopper tube so that the brace holes in the middle of the tube face down. Slide the tube through the two loops sewn to the top rear seam inside the hopper bag.

9

INNER BAG LOOPS

4.(Figure 11) Turn the second rear hopper tube so that the brace holes in the middle of the tube face up. As- semble the ends of the rear hopper tube onto the ends of the lower hopper side tubes. Fasten together using plastic plugs (Z).

REAR HOPPER TUBE

11

(brace holes on top)

 

 

PLASTIC PLUG (Z)

REAR HOPPER TUBE

LOWER HOPPER

(brace holes on bottom)

SIDE TUBE

7