ENGLISH
11.(Figure 16) Feel along the stitched fl ap on the hopper bag to locate the lower hole in each upper hopper side tube. Pierce a hole through both sides of the stitched fl aps in alignment with the lower hole.
14.(Figure 18) Secure the rope to the top center of the hopper bag frame.
18
UPPER HOLE
16
LOWER HOLE
UPPER HOPPER SIDE TUBE
12.(Figure 17) Insert a 3/8" x 3" clevis pin (S) through the lower hole in each upper hopper side tube. Next, assemble a bag arm tube (pointing in direction shown) onto each clevis pin and secure it with a 3/32" hair cotter pin (O).
13.(Figure 17) Assemble a vinyl cap (V) onto the end of each bag arm tube.
15.(Figure 19) To assemble the hopper bag to the sweeper, slide the ends of the bag arm tubes into the ends of the sweeper's hitch tubes and secure with two 1/4" x
19
BAG ARM TUBE |
|
3/32" HAIR | 1/4" x |
COTTER PIN (O) | CLEVIS PIN (R) |
LOWER HOLE
3/32" HAIR COTTER PIN (O)
3/8" x 3"
17
VINYL CAP
CLEVIS PIN (S)
BAG ARM TUBE
9