Agri-Fab 45-03371 inside, face up, (Figure 12), (Figure 14), (Figure 14), (Figure 13), (Figure 13), (Figure 15)

ENGLISH

4.(Figure 12)Turn the second rear hopper tube so that the brace holes in the middle of the tube face up.Assemble the ends of the rear hopper tube onto the ends of the lower hopper side tubes. Fasten together using plastic plugs (Z).

7.(Figure 14) Insert the bag frame strap into the stitched sleeve along the front edge of the bag bottom.

8.(Figure 14) Assemble the bag frame strap to the lower hopper side tubes using two 1/4" x 1-1/8" clevis pins

(Q) and 3/32" hair cotter pins (O).

REAR HOPPER TUBE	12
(brace holes on top)

PLASTIC PLUG (Z)

LOWER

HOPPER

SIDE TUBE

BAG FRAME STRAP

1/4" x 1-1/8"

CLEVIS PIN (Q)

14

3/32" HAIR COTTER PIN (O)

5.(Figure 13) Place the assembled lower hopper tubes into the bottom of the hopper bag

6.(Figure 13) Attach the ends of the lower hopper side tubes to the inside of the upper hopper side tubes using two 3/8" x 1/2" clevis pins (P) inserted from the inside, and two 3/32" hair cotter pins (O).

UPPER HOPPER	13
SIDE TUBE

3/32" HAIR COTTER PIN (O)

LOWER HOPPER

SIDE TUBE

3/8" x 1/2"

CLEVIS PIN (P)

HOPPER BAG

BOTTOM

9.(Figure 15) Secure the bag corners around the lower hopper side tubes by snapping the bag flaps to the bag bottom on both sides.

15

FLAP

SNAP