English
Français
Nederlands
8-6 Pan/tilt operation
1 When a zoom picture is displayed, press , , , or button.
•［］: Up |
|
•［］: Down |
|
•［］: Left |
|
•［］: Right |
|
• Moving diagonally is also possible. | [Zoom picture] |
|
The image range of the zoom picture and wide picture differs. The edges of the wide picture do not display with the zoom picture.
8-7 Zoom Picture Pre-set
The picture can be set to display using a set zoom picture position | 2 Press ZOOM/WIDE button (for at least 2 seconds). | ||
for when a call is received from the door station. When switching | • A beep will sound and the position setting will be completed. | ||
from the wide picture to the zoom picture, the zoom picture displays |
|
|
|
starting from the |
|
|
|
1 When a zoom picture is displayed, press p, q, t, or u button. (Ex. Pressing p button moves the picture up.)
•While viewing the picture, set the desired picture position.
NOTES: 1. To change the zoom picture position that has been set, perform the zoom position setting again. The previous setting will be overwritten.
2.The zoom picture position set with the master monitor station will also be displayed at the sub monitor station.
Night illumination
At night, the door station Illuminator LED lights up during calling or communication.
The Illuminator
LED lights up.
2 When communication ends, the illuminator LED will go out.
Light up the Illuminator LED during entrance | |
| monitoring |
1 When | TALK button is pressed during entrance |
monitoring, communication starts and the Illuminator LED will light up.
•Inside sound can be heard at the entrance.
Communication starts at this time, so be aware that inside sound can be heard at the entrance.
2 When communication ends, the illuminator LED will go out.
NOTES: Distinguishing between day and night is automatically done by the door station.
- 14 -
