Aiphone JK-1MED operation manual Mounting, Names, Back wiring, Surface wiring

English

4 MOUNTING

Back wiring	Mounting screws x 2
		1-gang box
	JK-1MED
		83,5 mm
		(3-5/16")
		Mounting bracket

Français

1. Press RELEASE button
(to insert or remove the wire).	1
2. Insert the cable into the terminal.		2

8mm (3/8")

Nederlands

Surface wiring

*When a 1-gang box is not mounted, the cable can be routed as surface wiring to the top or bottom of the unit. Cut a cable inlet on the upper part of the unit to allow passage of the wiring into the unit.

* To pass the cable through the back of the unit, cut out the cable inlet.

Wood
mounting	83,5 mm
screws x 2	(3-5/16")

Mounting bracket

5 NAMES

PS-1820		PS-1810DIN/
	Mounting bracket	PS-1820DIN
		Din rail
	1-gang box
	83,5 mm
	(3-5/16")

JK-1MED

Play LED (red)

PLAY button

Record LED (red)

RECORD button

POWER switch

Speaker

Color LCD video monitor Microphone

Door release LED (red) DOOR RELEASE button

Menu LED (red) MENU button

PAN/TILT button ZOOM/WIDE button

ADJUST button

CALL button Option button (*) Transmit LED (red)

TALK button

Screen brightness control (0 ～ 10)

Receive volume control (0 ～ 10)

Chime tone volume (0 ～ 10)

OFF button	(*) The option button controls connected option
MONITOR button	units such as turning lighting on and off and
	activation of added door releases.
- 6 -