Airlink UG-ASW232-1103 manual Twisted-Pair Ports, Rear Panel

32-Port 10/100Mbps Ethernet Switch User Guide

Twisted-Pair Ports

These ports supports automatic MDI/MDIX crossover detection function gives true 'plug and play' capability without the need of confusing crossover cables or crossover ports.

With the Auto-MDI function, you just need to plug-in the network cable to the hub directly and no need to care if the end node is Network Interface Card (NIC) or switches and hubs.

Rear Panel

Figure 4 shows the Switch’s rear panel.

Figure 4. Rear Panel

Rear of Switch

I

O

Module Slot AC Power Connector

Module Slots

The module slots are used to install module options for 100 BASE-FX connection.

AC Power Connector

Plug the power cord into the AC power connector.

AirLink+ 17