2.1.2 Panel Function Descriptions
¾APO1000
Front Panel | Rear Panel |
1.Reset Button : System reboot button press until LED flashed and release for system reboot or for reset to factory default press, LED flashes keep pressing until LED becomes static
2.Power :Red LED ON indicates power on, and OFF indicates power off
3.Signal Strength : Yellow LED ON indicates Low Signal (CPE Mode)
4.Signal Strength : Green LED ON indicates Normal Signal (CPE Mode) or (WDS Mode only)
5.Signal Strength : Green LED ON indicates High Signal (CPE Mode) or (AP Mode only)
6.WLAN :Green LED BLINKING indicates Wireless ON, and BLINKING quickly indicates Wireless Transmit quickly.
7.Ethernet :Green LED ON indicates connection, OFF indicates no connection
8. | PoE Connector : | For connecting to PSE |
9. | For connecting to |
In CPE Mode, the LED 3 ON indicates the signal Low ( Signal <= 10 RSSI); the LED 3 and 4 ON indicate the signal Normal (10 < Signal <=40 RSSI); the LED 3, 4 and 5 ON indicate the signal High ( Signal > 40 ).
Only LED 4 ON indicates the operating mode is WDS Mode; only LED 5 ON indicates the operating mode is AP Mode.
13