Airlink101 APO1000, APO1010 3.2.3 Create Virtual AP(VAP)

25
3.2.3 Create Virtual AP(VAP)
The APO1000/APO1010 support broadcasting multiple SSIDs, allowing the creation of Virtual Access Points, partitioning a
single physical access point into 8 logical access points, each of which can have a different set of security, VLAN t ag(ID) and
network settings. Figure 3-2 shows multiple SSIDs with different security type and VLAN settings.
Figure 3-2 Multiple SSIDs with different Security Type and VLAN Tag
3.2.3.1 Virtual AP Overview
The administrator can view all of the Virtual AP's settings via this page.
Please click on Wireless -> Virtual AP Setup and the Virtual AP Overview Page appears.
 VAP : Indicate the system's available Virtual AP
 ESSID : Indicate the ESSID of the respective Virtual AP
 Status : Indicate the Status of the respective Virtual AP. The VAP0 always On
 Security Type : Indicate an used security type of the respective Virtual AP
 MAC Filter : Indicate an used MAC filter of the respective Virtual AP
 MAC Filter Setup : Click “Setup” button to configure Virtual AP's MAC filter.
 VAP Edit : Click “Edit” button to configure Virtual AP's settings, including security type.
APO1000/APO1010