Airlink101 APO1000, APO1010 2.2 Web Management Interface Instructions

16
2.2 Web Management Interface Instructions
APO1000/APO1010 supports web-based configuration. Upon the completion of hardware installation, APO1000/APO1010
can be configured through a COMPUTER by using its web browser such as Internet Explorer or Mozilla Firefox.
1. Default IP Address : 192.168.2.254
2. Default IP Netmask : 255.255.255.0
3. Default User Name and Password :
The default user name and password for both root manager account and admin manager account are as follows:
Mode CPE Mode AP Mode WDS Mode Client Bridge +
Universal Repeater Mode
Management Account Root
Account Admin Account Root Account Root Account Root Account
User Name root admin root root root
Password default admin default default default
Step
 IP Segment Set-up for Administrator's Computer
Set the IP segment of the administrator's computer to be in the same range as APO1000/APO1010 for accessing the
system. Do not duplicate the IP Address used here with IP Address of APO1000/APO1010 or any other device within the
network
Example of Segment :
The valid range is 1 ~ 254 and 192.168.2.254 shall be avoided because it is already assigned to APO1000/APO1010.
192.168.2.10 is used in the example below.
Î IP Address : 192.168.2.10
Î IP Netmask : 255.255.255.0
 Launch Web Browser
Launch web browser to access the web management interface of system by entering the default IP Address,
http://192.168.2.254, in the URL field, and then press Enter.
System Login