performance the ACK Timeout could be made longer to accommodate.

RTS/CTS

Adjustment of RTS Threshold can be done to turn on RTS. CTS Timeout will take effect only when RTS is turned on.

Unlike wired Ethernet, radio transmission may begin with a RTS (Request to Send) frame, and receiver responds with a CTS (Clear to Send) frame. The RTS/CTS mechanism is called Channel Cleaning, all stations that received CTS will back off for certain period of time, multiple of the slot time.

Each CTS packet has a NAV (Network Allocation Vector) number n, the channel is reserved for sender and receiver for additional n-millisecond. The NAV guarantees the channel is free of interference in next n-millisecond. The last packet of ACK will set NAV to zero, indicated that connection is done and free the channel to others.

„CTS Timeout : CTS Timeout is in the range of 1~744 and set in unit of microsecond. The default value is 48 microsecond.

CTS Timeout will take effect only when RTS is turned on. Adjustment of RTS Threshold can be done to turn on RTS. When hidden wireless stations are present in the wireless network RTS can be considered to turn on to minimize collisions and increase performance. Ensure CTS timeout is long enough to avoid frequent re-transmission of RTS.

Slot Time and ACK/CTS Timeout settings for long distance links. It is important to tweak settings to achieve the optimal result based on requirement.

„RSSI Threshold : RSSI Threshold is in the range of -128~127.The default value is 24.

RSSI is defined as Received Signal Strength Indication, when the received signal strength from peer is below this threshold, the peer will be consider as disconnected. Set the threshold higher will make roaming happen earlier, set lower will allow weak signal peer to connect. In normal situation, the longer distance the lower signal strength will be sensed between peers people could consider to lower RSSI threshold to have bigger coverage from the AP or AP client perspective. If it doesn’t work well then people could consider to jack up RSSI threshold to have stable smaller coverage and leave AP clients in longer distance to associate with closer AP.

„Beacon Interval : Beacon Interval is in the range of 1~5000 and set in unit of millisecond. The default value is 100 msec.

Access Point (AP) in IEEE 802.11 will send out a special approximated 50-byte frame, called “Beacon”. Beacon is broadcast to all the stations, provides the basic information of AP such as SSID, channel, encryption keys, signal strength, time stamp, support data rate.

All the radio stations received beacon recognizes the existence of such AP, and may proceed next actions if the information from AP matches the requirement. Beacon is sent on a periodic basis, the time interval can be adjusted. By increasing the beacon interval, you can reduce the number of beacons and associated overhead, but that will likely delay the association and roaming process because stations scanning for available access points may miss the beacons. You can decrease the beacon interval, which increases the rate of beacons. This will make the association and roaming process very responsive; however, the network will incur additional overhead and throughput will go down.

23

Page 27 Page 29
Page 28
Image 28
Airlink101 APO1010, APO1000 manual Rts/Cts
Page 27 Page 29

APO1010, APO1000 specifications

The Airlink101 APO1000 and APO1010 are cutting-edge access points designed to enhance wireless connectivity for both residential and commercial applications. With a focus on delivering high-speed internet access and robust performance, these devices are ideal for users who demand reliability and scalability in their networking solutions.

One of the standout features of the Airlink101 APO1000 and APO1010 is their dual-band functionality, allowing them to operate on both the 2.4GHz and 5GHz bands. This dual-band capability helps to reduce interference and provides more bandwidth, which is essential for running multiple devices simultaneously. Users can enjoy faster speeds, better range, and improved signal quality, making these access points perfect for streaming high-definition content or gaming.

Equipped with advanced IEEE 802.11ac wireless technology, the AIRLINK101 APO series can deliver data rates of up to 1.2 Gbps. This high throughput is vital in today’s fast-paced digital landscape, where many devices are connected at once. Additionally, the Airlink101 APO1000 and APO1010 support MU-MIMO technology, which enables multiple users to access the network without experiencing slowdowns, ensuring a seamless connectivity experience.

Another significant characteristic of the Airlink101 access points is their ease of installation and management. Both models come with a user-friendly web interface that simplifies setup and configuration. For users who prefer a more hands-on approach, the devices support Power over Ethernet (PoE), allowing for flexible placement without the need for additional power outlets.

Security is also a top priority for the Airlink101 APO series. With support for the latest wireless security protocols, including WPA3, users can rest assured that their network is safeguarded against unauthorized access and potential threats. Advanced firewall features further enhance network protection, ensuring a secure browsing experience for all connected devices.

In summary, the Airlink101 APO1000 and APO1010 are exemplary access points designed to meet the needs of modern users. By combining high-speed connectivity, dual-band support, advanced security features, and user-friendly management, these devices are well-suited for anyone looking to improve their wireless networking environment. Whether for home use or business applications, the Airlink101 APO series delivers the performance and reliability that users expect in today's digital age.
Top Page Image Contents