AIRSTREAM LAND YACHT GAS Replacement of the halogen bulb:
• When replacing the halogen bulb do not touch the glass portion of the
bulb with your bare hands since even small amounts of impurities burn
into the surface and reduce the service life of the bulb. Use a clean cloth,
paper napkin, or similar material to hold the bulb during installation.
With most bulbs you will not need to touch the glass part to install the
bulb.
• Whenever working on any electrical system, switch off the electrical
accessory you are working on or refer to the electrical system section of
your owner’s manual. Failure to do this could result in short circuits.
• To prevent injuries and damage, comply with any instructions provided
by the bulb manufacturer.
Any questions or comments may be directed to Kaper II, Inc. at1-800-336-2011.