Aiwa AV-D35 manual Manual Tuning, Press the UP or DOWN button to select a station, English, L--Al

MANUAL TUNING

MONO

TUNER

1		<...>
	L--Al	u
L—”——i
I

1 Turn the FUNCTION selector to select theTUNER function, and press the VIDEO 1/5.1 CH/BAND button repeatedly to select the desired band.

~

The display changes to frequency indications after indicating band and video source (V1, V2 or V3) for two seconds.

2Press the UP or DOWN button to select a station.

Each time the button is pressed, the frequency changes. When a station is received, “TUNE is displayed for two seconds. During FM stereo reception, 11{~11]is displayed.

To search for a station quickly (Auto Search)

Keep the UP or DOWN button pressed until the tuner starls searching for a station. After tuning in to a station, the search stops.

To stop the Auto Search manually, press the UP or DOWN button.

●The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press the MONO TUNER button on the remote control so that “MONO appears on the display.

Noise is reduced, although reception is monaural.

MONO

To restore stereo reception, press the button so that “STEREO appears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Hold down the VIDEO 1/5. 1CH/BAND button and press the POWER button.

To reset the interval, repeat this procedure.

13 ENGLISH