Aiwa AV-D35 manual Custom Audio Adjustment, Vowme Control, Sound Adjustment During Recording

CUSTOM AUDIO ADJUSTMENT

VOL

VOWME CONTROL

Turn the VOLUME control on the unit, or press the VOL buttons on the remote control.

The volume level is shown on the display for four seconds. It can be adjusted between Oand MAX (50). It flashes when being set over the level 44.

The volume level remains memorized even after the power is turned off. However, if the power is turned off when the volume is set to more than 21, it is automatically set to 20 the next time the power is turned on.

To adjust the Ieft/right balance of the front speakers

Press the BALANCE button to display “L/R OdB. Then press the DOWN or UP button repeatedly within four seconds.

Note that the front speakers balance of the 5.1 CH and Dolby Pro Logic modes is also changed,

To mute the sound temporarily

Press the MUTING button (–20 dB).

‘(MUTE ON” appears on the display for four seconds. While muting the sound, the selected function indicator flashes. Press the MUTING button again to restore the sound.

(cancel)

m

Low-frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low-frequency sound is originally emphasized. In this case, cancel the T-BASS system.

SOUND ADJUSTMENT DURING RECORDING

The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording.

ENGL.ISH 8