Aiwa CDC-X30MP manual Table of Contents, Theft Protection

TABLE OF CONTENTS
THEFT PROTECTION	2
BASIC OPERATION, AUDIO AND CLOCK
ADJUSTMENT	3
RADIO OPERATION	4
CD PLAYER OPERATION	5
AUXILIARY EQUIPMENT	9
OTHER FUNCTIONS	9
CARD REMOTE CONTROL	10
TROUBLESHOOTING	11
MAINTENANCE	11
SPECIFICATIONS	11

Note

Some buttons are assigned two or more functions. For detailed descriptions, refer to the related pages.

Resetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object such as a pencil.

Front panel detached

Reset button

Note

Pressing the reset button will erase the clock and some memorized functions.

DEMO (Demonstration) mode

The unit has an extra display (DEMO) mode which demonstrates the illumination modes of the unit. The unit switches to DEMO mode automatically if you turn the unit on and leave it as it is for 5 seconds after all the connections have been completed.

To cancel DEMO mode

1During DEMO mode, press and hold Jog dial (PUSH- SOURCE) until “ILL” appears on the display.

2Press +or -to select “DEMO”.

3Turn Jog dial to select “OFF.”

To resume DEMO mode, select “ON” in step 3. (See the illustration on page 3.)

THEFT PROTECTION

Take the front panel with you when leaving the car, and keep it in the supplied carrying case.

Detaching the front panel

Before detaching the front panel, remove the CD to prevent possible damage to the unit.

1Press zto remove the CD.

2Press and hold PWR/ATT until the unit turns off.

3Press %. (Hold the panel with one hand to prevent accidentally dropping it.)

4Remove the panel.

Attaching the front panel

1Engage the left side of the front panel to the left catch on the unit.

2Push the panel forward until it locks. Be sure not to press any buttons while you are attaching the panel.

Note

Do not touch the connector on the reverse side of the front panel. This could cause a poor or faulty connection.

ENGLISH 2