CD PLAYER OPERATION

Playing a CD

You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
SHUFREP1INT
t
/
g
,
r
/
f
z
1Insert a CD.
“DISC” appears on the display.
CD play starts.
If a CD is already inserted, press Jog dial (PUSH-
SOURCE) repeatedly to select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
Labeled-side up
Track number Elapsed playing time
CD indicator
Jog dial (PUSH-SOURCE)

Presetting stations automatically

(Auto Memory)
1Press TU (TUNER) repeatedly to select the desired
band (F1, F2, F3, A1, or A2).
2Press and hold PS/A.ME until automatic presetting
starts.
The unit automatically stores up to 6 stations for
each band.
After completion of automatic presetting, the unit
tunes in to all the stations stored on the preset
station buttons in order (Preset Scan).
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
order.
To cancel Preset Scan, press PS/A.ME again or any
preset station button.

Presetting stations manually

(Manual Memory)
1Press TU (TUNER) repeatedly to select the desired
band (F1, F2, F3, A1, or A2).
2Press + or - to tune in to a desired station (see
“Tuning in to a station” as well for another tuning
method).
3Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
button.

Tuning in to a preset station

1Press TU (TUNER) repeatedly to select the desired
band (F1, F2, F3, A1, or A2).
2Press the preset station button on which the desired
station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.
5
ENGLISH