ENGLISH
4

Setting the beep tone

1Turn off the unit.
2Press and hold SEL until “BEEP” appears on the
display.
3Turn Jog dial to select ON or OFF.
4Press SEL.

Setting the clock

1Press and hold DSPL until the clock indicator
flashes on the display.
2Press + (to set hour) or - (to set minute), and
then turn Jog dial.
3Press DSPL.

Displaying the clock

1Press DSPL.
To return to the former display, press DSPL again.
RADIO OPERATION

Tuning in to a station

(Seek/Manual Tuning)
LOTU (TUNER)
+/-
Band indication*
*“F” means FM.
“A” means AM.
1Press TU (TUNER) repeatedly to select the desired
band (F1, F2, F3, A1, or A2).
2* Press + (to move to higher frequencies) or - (to
move to lower frequencies) to tune in to a station.
“ST” appears on the display when an FM station is
broadcasting in stereo, and receiving conditions are
good.
*Seek Tuning and Manual Tuning
•Press and hold + or - until Seek Tuning starts.
The unit locates a station automatically (Seek Tuning).
To stop Seek Tuning, press + or - again.
•Press + or - repeatedly to search for a desired station
while increasing or decreasing the frequency step by
step (Manual Tuning).
Monaural mode
When FM signals become weak, or FM reception
becomes poor, the unit automatically switches to
Monaural mode to reduce noise.
Local mode
Local mode allows you to tune in only to strong stations
during Seek Tuning.
1Press LO before you start seek tuning.
“LO” appears on the display.
To return to Distant mode, press LO again.
“LO” disappears and the unit tunes in to all receivable
stations.

Using preset stations

You must preset stations before you can tune in to a
station using preset station number buttons.
TU (TUNER)
PS/A.ME
+/-
Preset station number
Preset station buttons 1 to 6
Stereo indicator
Frequency indication
Tuner indicator
Local indicator