Hanns.G HG281 user manual Error Message & Possible Solutions, YPbPr mode, User’s Manual

User’s Manual

ERROR MESSAGE & POSSIBLE SOLUTIONS

CABLE NOT CONNECTED :

1.Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws.

2.Check the signal-cable’s connection pins for damage.

INPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

RECOMMENDED AND SUPPORTED TIMING MODE: (Analog / Digital mode)

MODE	RESOLUTION	REMARK
1	640x480@60 Hz	VGA
2	640x480@67 Hz	MAC
3	640x480@72 Hz	VGA
4	640x480@75 Hz	VGA
5	720x400@70 Hz	VGA
6	800x600@72 Hz	SVGA
7	800x600@75 Hz	SVGA
8	800x600@72 Hz	SVGA
9	800x600@75 Hz	SVGA
10	832x624@74.5 Hz	MAC
11	1024x768@60 Hz	XGA
12	1024x768@70 Hz	XGA
13	1024x768@75 Hz	XGA
14	1280x720@60 Hz	SXGA
15	1280x1024@60 Hz	SXGA
16	1280x1024@75 Hz	SXGA
17	1440x900@60 Hz	WXGA+
18	1600x1200@60 Hz	UXGA
19	1680x1050@60 Hz	WSXGA+
20	1920x1200@60 Hz	WUXGA

(YPbPr mode)

MODE	RESOLUTION
1	720x480i@60 Hz
2	720x480p@60Hz
3	720x576i@50Hz
4	720x576p@50Hz
5	1280x720p@50Hz
6	1280x720p@60Hz
7	1920x1080i@60Hz
8	1920x1080p@60Hz
9	1920x1080i@50Hz
10	1920x1080p@50Hz

19