Printronix SL5000r MP manual Control Panel Error Messages, Solution, Explanation

Chapter 2 Error Messages

Error Messages

The RFID encoder can detect a number of errors. When one of these errors occurs, the RFID encoder alerts the printer to perform the currently selected error action (see “Error Handling” on

page 27) and display the appropriate error message on the control panel’s LCD (see Table 3).

Table 3. Control Panel Error Messages

Error Message	Explanation	Solution
NON-RFID DATA	A job was printed that had no	Press PAUSE to clear the
On Rfid Tag	RFID commands on at least	message.
	one form of the job while	Set Non-RFID Warning to
	RFID tags were installed in	Disable, print a job with
	the printer and the Non-RFID	RFID commands on every
	Warning menu item is set to	form, or install non-RFID
	Enable.	labels in the printer.
RFID Comm Err	RFID error: communication	Press PAUSE to clear the
Check Cable	cannot be established with	message.
	the RFID encoder. Reader	See “Troubleshooting” on
	will be set to Disable in the	page 70.
	RFID CONTROL menu and
	the previous port settings
	restored.
RFID FW ERR:	The RFID encoder firmware	Press PAUSE to clear the
Version Mismatch	version is not capable of	message.
	operating with the printer	Redownload the program
	software.	file to the printer.
RFID LOCK CMD:	A lock command was	Press PAUSE to clear the
Not supported!	executed on a tag which does	message.
	not support locking. All	Remove the lock command
	Class 1 tags and most Gen 2	from the application.
	tags support locking. Other
	tag classes such as Class 0+,
	Class 1.19, and Class Zuma
	do not support locking.

68