Printronix SL5000r MP Host Verification, PPI/ZGL EPC Programming Examples, Format HVx,y,ASCII

Host Verification

Host Verification

IMPORTANT This command requires the use of the Return Status port. See “Return Status Port” on page 64.

Purpose This command sends back the data in a ^FN (Field

Number) field to the host.

Format ^HVx,y,<ASCII>

^HV Host Verification command.

xSpecified Field Number. The default is 0. The acceptable value range is 0 to 9999.

yNumber of characters to be returned. The default is 64. The acceptable value range is 0 to 256.

<ASCII> Header (in uppercase ASCII characters). The default is None. The acceptable value range is 0 to 256 characters.

Example of Use ^XA ^WT0^FDHELLOTAG^FS ^RT3,0,1,1^FS ^FO100,100^A0N,60^FN3^FS ^HV3,16,TAGNO = ^FS

^XZ

Example of Response

TAGNO = 48454C4C4F544147

PPI/ZGL EPC Programming Examples

IMPORTANT For all examples make sure Label Length in the QUICK SETUP menu matches the physical length of the installed media.

Example 1

This programming example programs data into an

RFID tag and prints the encodation onto a smart label.

^XA

//Begin ZPL form.

61