Printronix SL5000r MP manual Rfrtag

RFRTAG

VERIFY;DF8;H;*DF8 = *;*\r\n*

END

~EXECUTE;SGTIN;FCNT3

~DF1;*313233343536373839414243*

~DF3;*3435363738*

~DF6;*3224115*

~DF7;*3132333*

~AF1;<DF2>

~AF2;<DF6>

~AF3;<DF7>

~AF4;<DF8>

~NORMAL

RFRTAG

Purpose To read the content of an RFID tag (embedded in a smart label) into a dynamic field. This command cannot be mixed with the RFREAD command.

Mode CREATE

Format RFRTAG[;UNLOCKn[;format]];size[;mem bank] (Bit Field)+

STOP

RFRTAG	Specifies the RFRTAG command, enter
	RFRTAG;
size	A decimal number specifying the overall
	bit length of the RFID tag memory bank.

UNLOCKn[;format]

Optional parameter to unlock the data block so it can be overwritten later. n is the passcode. The acceptable values for n are 1 to FFFFFFFF in hex, a 4 bytes data. The value of n should be the same passcode used for the LOCK option to unlock the protected data block. When the UNLOCKn option is used to unlock any memory bank, which at the same is programmed to read the tag, the operation UNLOCKn will not unlock ACS memory area. The passcode (n) can also

45