Printronix SL5000r MP manual RFID PGL Commands, Rfwtag

RFWTAG

RFID PGL Commands

IMPORTANT For all examples make sure Label Length in the QUICK SETUP menu matches the physical length of the installed media.

RFWTAG

Purpose The RFWTAG command is used to program an RFID tag (embedded in a smart label) using structured data format. The data structure of an RFID tag can consist of one or more bit fields. Each bit field specifies its own field length, the data format, the field type plus additional options if the type is incremental, and finally the field value.

Mode CREATE

Format RFWTAG[;LOCKn[;format]];size[;mem bank] (Bit Field)+

STOP

RFWTAG Specifies the RFWTAG command, enter

RFWTAG;

LOCKn[;format]

Optional parameter to lock the data block to prevent it from being overwritten. By default, the data are not locked initially. n is the passcode. The acceptable values for n are 1 to FFFFFFFF in hex, a 4 bytes data. When the LOCKn option is used to lock any memory bank, which at the same time is programmed with the write data, the same passcode will be written on ACS memory bank. The ACS memory bank will also be locked if ACS is not locked at the time of the operation. If ACS is already locked at the time of the operation, the passcode needs to match the current content of ACS so that the memory bank lock takes effect. The passcode (n) can also be in dynamic format. For dynamic format, enter

35