Printronix SL5000r MP manual Enable RFID Motion, Specify RFID Retries for a Block, RFID Setup

Enable RFID Motion

The acceptable value range is 1 to 64 bits for each partition.

Enable RFID Motion

Purpose This command enables or disables RFID paper motion. Be default, labels automatically print at the end of the format. This command allows you to inhibit the label from moving.

Format ^RMa

^RM Enable RFID Motion command.

aThe default is Y. The acceptable values are Y (Yes, move the label) or N (No, do not move the label).

Specify RFID Retries for a Block

Purpose This command specifies the number of times that the printer attempts to read from or write to a particular block of a single RFID tag. The number will reflect in the Auto Retry menu.

Format ^RRa

^RR Specify RFID Retries command.

aThe default is 2. The acceptable value range is 1 to 9.

RFID Setup

Purpose This command sets up parameters including tag type, read/write position of the transponder, and error handling.

Format ^RSa,b,c,d,e,f,g,h

^RS RFID Setup command.

aSelects the tag type. The acceptable values range is 0 to 5. (This option is currently not supported.)

59