Printronix SL5000r MP manual Control Panel Error Messages, Explanation, Solution

Table 3. Control Panel Error Messages

Error Message	Explanation	Solution
RFID MAX RETRY	Error Handling = Overstrike in	Press PAUSE to clear the
Check System	the RFID CONTROL menu,	message.
	and the Label Retry count has	See “Troubleshooting” on
	been exhausted.	page 70.
RFID TAG ERR:	A write was attempted on a	Press PAUSE to clear the
Read-Only Tag	read-only tag.	message.
		Change media to writable
		tags or remove the write
		command from the
		application.
RFID TAG FAILED	Error Handling = Stop in the	Press PAUSE to clear the
Check Media	RFID CONTROL menu, and	message.
	the RFID encoder could not	See “Troubleshooting” on
	read the RFID tag.	page 70.
RFID UNLOCK CMD:	An unlock command was	Press PAUSE to clear the
Not Supported!	executed on a tag which does	message.
	not support locking.	Remove the unlock
		command from the
		application.
RFID ACS FIELD:	The ACS field was accessed	Press PAUSE to clear the
Not Supported!	on a tag which does not	message.
	support the ACS field.	Remove references to the
		ACS field from the
		application.
RFID KIL FIELD:	The KIL field was accessed	Press PAUSE to clear the
Not Supported!	on a tag which does not	message.
	support the KIL field.	Remove references to the
		KIL field from the
		application.

69