Printronix SL5000r MP manual 3 MP2 RFID, New Coupler System

3 MP2 RFID

New Coupler System

The MP2 RFID has a new coupler design that supports a greater variety of tag types. The new MP2 coupler is moveable laterally via a coupler handle centered under the media guard (next to the gap sensor). See figure on page 72.

The coupler has four positions on a four inch printer and five positions on a six inch printer. These positions are color coded on the front of the media guard. The possible positions moving from inboard (nearest the electronic bay) to outboard (nearest the window) are as follows:

Yellow: 1st Position (furthest inboard)

Orange: 2nd Position

Red: 3rd Position

Blue: 4th Position (furthest outboard on a 4 inch printer)

Green: 5th Position (this uses a second coupler position indicator available on six inch printers only)

Once you select a tag type from the front panel, a message will display above the selected tag type:

Ant Pos x

where x is Yellow, Orange, Red, Blue, or Green.

71