Printronix SL5000r MP manual RPTn, RSTn, RFID PGL Commands

Chapter 2 RFID PGL Commands

idir	Enter a plus sign (+) or leave the field blank to
	increment (default). Enter a minus sign (–) to
	decrement.
step	A decimal number specifies the amount to increment/
	decrement each time the form is executed. The
	increment is at bit level and will automatically wrap
	based on the field size.
RPTn	The optional incremental repeat count parameters to
	specify the number of times a particular field value is
	repeated before it is incremented. The default repeat
	count parameter n is 1, which will increment the field
	value each time it prints. The repeat count can range
	from 1 to 65535.
RSTn	The optional incremental reset count parameter to
	specify the number of times an incremented field is
	printed before it is reset to the starting value. By
	default, there is no reset count. The reset count
	parameter n can range from 1 to 65535.
startdata	Defines the value of the field or the starting value of the
	incremented field. If the field is dynamic, the value will
	be specified later in the EXECUTE mode. The data
	must be specified within a pair of delimiters (D). The
	delimiter (D) cannot be a “/” or SFCC character since
	the “/” will comment out the rest of the line and SFCC is
	reserved for PGL commands. If “R” or “S” is used as
	delimiters, the data pattern must not comprise of the
	keywords in the incrementing options. Since the
	delimiters could be different from one value to another,
	proper care must be taken to avoid one of the letters
	mentioned above.

NOTE: 1. The RFWTAG command cannot be mixed with RFWRITE in the same form.

2.Each field structure must be specified in a single line and in the order it appears in the RFID tag from MSB bits to LSB bits (left to right). The sum of all the field lengths must match the size of the tag.

3.The host data are read in as ASCII characters. They would be converted to binary representation for the base

38