Printronix SL5000r MP Indicate dynamic data, Field to store the read, Result. Replace n with a

Chapter 2 RFID PGL Commands

be in dynamic format. For dynamic format, enter LOCK<DFn>, where DFn is the dynamic field defined in EXECUTE mode.

format is the optional parameter to specify the format for the passcode data. Enter B for binary,

D for decimal, and H for hexadecimal. The default is decimal if format is not specified.

mem bank Specifies which tag logical memory area that this command will be applied. If omitted, it defaults to the EPC memory area. Other areas include Identification, User Data, Access area, and Kill area. Enter one of the following values:

‘EPC’ – EPC 12 bytes data area (default) ‘TID’ – Tag identification 8 bytes area ‘USR’ – User 32 bytes area

‘ACS’ – 4 bytes of access code area. ‘KIL’ – 4 bytes of kill code area

Bit Field A line description of a bit field; must have one of the following syntax formats: length;DFn;format

length	A decimal number
	specifying the bit length of
	a field within a tag. The
	maximum length is 64 bits
	for binary or decimal
	format. For hexadecimal
	format, the bit length can
	be up to the maximum bit
	length specified for the
	corresponding memory
	bank.
DFn	Indicate dynamic data
	field to store the read
	result. Replace n with a
	number ranging from 1 to
	512 to identify the field

46